Interfaces
|
|
 |
|
 |
 |
 |
T16-002, $82
This interface is opto-isolated |
T16-003, $82
This interface will work
fine with most Palm hotsync cables |
T16-004, $69.50.
This
version of the T16-003 is without connectors. |
|
|
|
 |
 |
 |
T16-005, $69.50
A T16-006 without connectors & enclosure |
T16-006, $82
This interface requires a Cable 16 |
T16-007, $82
A CAN only interface |
|
|
|
|
 |
 |
T16-008, $122
This is a T16-006 with CAN
capabilities. |
T16-009, $122
This is a T16-003 with CAN
capabilities. |
T16-010, $69.50
Board only with a DB9 on each end. |
| |
|
|
 |
|
 |
T16-011, $122
The
T16-011 is our T16-002
with CAN capabilities,
|
T16-012, $82
CAN only interface |
T16-013, $82
This interface has a male
pin OBD2 connector on one end and a female pin DB9 connector on the other
|
|
|
|
 |
 |
T16-014, $122
This is a T16-013 with CAN
capabilities. |
T21-002, $118
This interface will connect to the USB port on your device |
T21003, $118
requires DB9 to OBD2 CABLE |
|
 |
 |
|
|
T22-001, $144
INTERFACE TESTER |
T22-002 $122 each
OBD2 INTERFACE TESTER,
recommended for I/M inspection stations. |
|
|
|
Cables
|
 |
 |
 |
|
Cable 3, $40.00 |
Cable 7, $22.50 |
Cable 15, $25.50 |
|
|
 |
 |
 |
| Cable 16, $22.50 |
Cable 17, $50, for Ferrari only |
Cable 18, $25 |
|
|
 |
 |
for additional information on cables click here |
|
Cable 19, $22.50 |
Cable 20, $35.50 |
|
|
|
 |
Pins
male or female,
10¢
(ten cents each) |
 |
|
Male OBDII pins |
|
Female OBDII pins |
|
|
 |
Connectors
male or female, $5 each |
 |
|
Male OBDII Connector Block |
|
Female OBDII Connector |
|
|
 |
Cases
These cases are designed to
hold the male OBD2 connector block and require use of hot melt glue to hold
block in place. |
 |
|
CNS Case, $4.00
for use with cable type DB9 |
|
CNM Case, $4.00
for use with PCB mounted DB9 |
|
|
